Ammann ATR 60 P Operator's Manual

Ammann ATR 60 P

154 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Ori gi nal be triebs an lei tung (DE)

Trans la ti on of the ori gi nal

Ope ra ting in struc tions (EN)

Tra duc ti on du Mo de d‘emploi

ori gi nal (FR)

Tra duc ción del Instruc cio nes

de ser vi cio ori gi nal (ES)

Book ID: 2-00013021

ATR 60 P

ATR 68 P

Honda GXR120RT

Serial Nr. ########-

Table of Contents

Other manuals for Ammann ATR 60 P

Operating Instructions34 pages

Questions and Answers:

P
petersantosAug 4, 2025
Why Ammann ATR 60 P engine does not start?
- C
  craig16Aug 4, 2025
  There are several reasons why the engine might not start. It could be due to a closed fuel valve – ensure it is set to the «ON» position. Another reason could be an empty fuel tank – refill it. A faulty ignition spark could also be the culprit – replace the spark plug. Check that the ignition switch is set to «ON», and if it’s faulty, replace it. Finally, verify the engine oil level, as a low level can prevent the engine from starting.
S
Stephanie MeyersAug 9, 2025
What to do if Ammann ATR 60 P engine does not reach top speed?
- A
  Antonio GonzalezAug 10, 2025
  If the engine isn't reaching its top speed, consider these possible causes: the throttle cable might be faulty and need replacement, or the gas cable adjustment may be incorrect, requiring adjustment. Also, a clogged air filter can restrict performance, so clean the filter cartridge or replace it. In some cases, the engine or carburetor itself may be faulty, necessitating replacement or repair.
J
Juan KingAug 14, 2025
What to do if Ammann Construction Equipment engine does not start when starter is operated?
- C
  cynthia32Aug 14, 2025
  If the engine fails to start when the starter is engaged, the starter itself may be faulty and require replacement. Alternatively, a broken spring within the starter mechanism could be the cause, also necessitating starter replacement.
E
Elizabeth LandryAug 19, 2025
Why Ammann Construction Equipment tamper movement is irregular, jumps?
- H
  Harold SteinAug 20, 2025
  Irregular or jumping tamper movement can stem from a few issues. The speed might be incorrect, so correct it. The springs could be broken and need to be renewed by Ammann Customer Service. Also, ensure the throttle lever is set to «max».
C
Crystal HarmonAug 25, 2025
What to do if Ammann ATR 60 P engine runs at high speed, but no vibration?
- J
  John ValentineAug 25, 2025
  If the engine runs at high speed without producing vibration, the centrifugal clutch may be faulty and require replacement. Alternatively, the connecting rod might be broken, requiring renewal by the Ammann after-sales service.
C
Christopher CookAug 29, 2025
How to fix Ammann Construction Equipment starter cable if reversing starter does not return to initial position?
- K
  Kimberly TerryAug 29, 2025
  If the reversing starter cable doesn't return to its initial position, it could be due to fouling, in which case cleaning the starter is recommended. Alternatively, a broken spring might be the cause, requiring replacement of the starter.

Ammann ATR 60 P Specifications

General

Brand	Ammann
Model	ATR 60 P
Category	Construction Equipment
Language	English

Related product manuals

Preview: Ammann AR 65

Preview: Ammann ARX 36

Preview: Ammann AV 70 X

Preview: Ammann ARX 23-2

Ammann ARX 23-2

Preview: Ammann ASC 200 Series

Ammann ASC 200 Series