FAQ’s
Q: Why does the POCKAMP not work?
A: Check that the power supply meets the specifications of the POCKAMP
Voltage (V) and polarity must match the specification exactly.
Current (mA) must be equal to or more than the specified minimum
requirement.
Ensure the instrument is connected to the POCKAMP’s INPUT
Q: Is it only for guitar?
A: It is not only for acoustic/electric guitar,bass guitar,violin and Keyboard,
but also support Mp3 AUX input.
Q: what adapter do I need to plug cellphone or mp3 player into this amp?
A: 1 8The unit has a / "(3.5mm) input jack in the back with its own volume
control forheadphones/MP3. So you will need cable with 3.5mm plug on
both ends.
Q: How do I attach it to guitar?
A: You need a jack that plugs between the guitar and the amp.
Q: Why is my POCKAMP making unwanted nosie?
A：Check that the input and output cables are not damaged.
Check that the POCKAMP is receiving sufficient from the power
supply.
Avoid interference from external devices such as radios,
televisions, speakers, magnets, fluorescent lighting, etc.
Ensure the instrument is fully shielded and grounded.
Instruments with single coil electromagnetic pickups can produce
cycle 60 hum.
EN
To Next Page
Loading...