6
SAFETY INFORMATIONSAFETY INFORMATION
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
detergent.
26. Warning-If connection is made to a potable water
system, the system Should be protected against
Store the power washer indoors to prevent the
water in the unit from expanding under freezing
conditions. When the water freezes and expands,
your power washer will be damaged and become
inoperable. Or, if storing outdoors, it is
recommended you use pump saver (not included)
to protect pumps.
27. use hot water with your power washer. It will
overheat and damage the high pressure pump.
28. leave the power washer unattended while it is
powered “ON”.
29. turn the water supply on before turning the
power washer power to on. Running the pump dry will
cause damage to the internal components.
30. use a water supply to your power washer that
exceeds 150 PSI maximum.
31. disconnect the high pressure hose from the
power washer while the system is pressurized.
32. permanently engage the trigger mechanism
on the spray gun.
33. operate the power washer unless all
components are properly and securely connected.
34. allow the power washer pump to run for
water supply. This can cause the motor and pump to
overheat and fail.
35. use lances or other parts that are not
36. use an extension power cord since it defeats
For US unit only) and
increases the chance of electrocuting the operator.
37. spray any electrical outlet with your power
washer.
38. Inspect the power cord before using. use it if
it is damaged.
39. Stay alert - watch what you are doing.
Ground Fault Circuit Interrupter Protection (For US
unit only)
This pressure washer is equipped with a ground-fault
circuit-interrupter (GFCI) built into the plug of the
power-supply cord. This device provides additional
protection from the risk of electric shock. Should
replacement of the plug or cord become necessary,
use only identical replacement parts that include
GFCI protection.
This product must be grounded. If it should
malfunction or breakdown, grounding provides a path
of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with
a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and
ordinances.
– Improper connection of the equipment-
grounding conductor can result in a risk of
service personnel if you are in doubt as to whether
the outlet is properly grounded. Do not modify the
electrician. Do not use any type of adaptor with this
product.
To Next Page
Loading...