16
7.2 If the unit must be transported a long distance. Make
sure you stop the unit and remove any connections. Try
and drain the unit of all remaining fuel in the tank and turn
the fuel calve to the off position.
7.3 Make sure to inspect the unit after you have shut it down.
Check the bolts and connections are all secure.
SECTION 8: MAINTENANCE
It is very important to get the best out of your AMP Triad 3
in 1 that you keep up on all maintenance, Regular oil and
fluid changes will also ensure you are decreasing the
amount of pollution being put into the air. In order to
ensure you are maintaining your equipment we have
comprised a list of daily checks procedure to be sure your
unit is running at maximum potential. If any maintenance
procedures need to be conducted by a professional please
do so. And for any questions with these procedures feel free
to contact a AMP Industrial service technician for step by
step directions on how to do so. If the unit is being operated
in a dusty area make sure to maintain these checks more
frequently.
8.Maintenance
Change oil(when warm the unit, remove the oil to make sure
that the drain the oil completely)
Daily maintenance cycle
To Next Page
Loading...