Need help?Do you have a question about the AMP Mitre-Mite T-400 and is the answer not in the manual?
Information about the manufacturer and their experience.
Details regarding the warranty period and coverage for machine parts.
Outlines responsibilities and arrangements the customer must make before use.
Explains the operational method of the double mitre saw.
Lists the primary parts that constitute the machine.
Describes the structural elements, focusing on the Z axis.
Lists the standard equipment included with the machine.
Describes optional accessories available for the machine.
Defines the intended and appropriate uses for the machine.
Lists prohibited or unsafe uses of the machine.
Details the safety features and protective mechanisms on the machine.
Explains the different stop functions and their categories.
Provides guidelines for safe operation and risk mitigation.
Instructions and precautions for transporting and handling the machine.
Guidelines for proper storage of the machine during inactivity.
Details on how to connect the pneumatic system to the machine.
Instructions for making the electrical connection to the machine.
How to adjust the speed at which the blades descend.
Steps to adjust the height of the front protective guard.
Instructions for adjusting the cutting angle of the blades.
How to adjust the position of the blades relative to each other.
Procedures for adjusting the vertical angle of the blades.
Step-by-step guide for replacing the saw blades.
Overview of the machine's control panel buttons and their functions.
Steps to commission and prepare the machine for use.
Instructions on how to operate the machine for cutting.
Conditions under which maintenance operations must be performed.
Steps to isolate the machine from power sources before maintenance.
General safety precautions to observe during maintenance.
Recommended cleaning procedures and frequency.
Information on the automatic lubrication of mechanical parts.
Schedule and procedures for routine maintenance.
Safety recommendations for maintenance and repair personnel.
Table to help identify and resolve common machine failures.
How to contact support for information or assistance.
A list of recommended spare parts for the machine.
Instructions on how to order spare parts.
General statements or declarations related to the document.
References to attached diagrams like mechanical, electrical, and pneumatic schemes.
Information about the manufacturer and their experience.
Details regarding the warranty period and coverage for machine parts.
Outlines responsibilities and arrangements the customer must make before use.
Explains the operational method of the double mitre saw.
Lists the primary parts that constitute the machine.
Describes the structural elements, focusing on the Z axis.
Lists the standard equipment included with the machine.
Describes optional accessories available for the machine.
Defines the intended and appropriate uses for the machine.
Lists prohibited or unsafe uses of the machine.
Details the safety features and protective mechanisms on the machine.
Explains the different stop functions and their categories.
Provides guidelines for safe operation and risk mitigation.
Instructions and precautions for transporting and handling the machine.
Guidelines for proper storage of the machine during inactivity.
Details on how to connect the pneumatic system to the machine.
Instructions for making the electrical connection to the machine.
How to adjust the speed at which the blades descend.
Steps to adjust the height of the front protective guard.
Instructions for adjusting the cutting angle of the blades.
How to adjust the position of the blades relative to each other.
Procedures for adjusting the vertical angle of the blades.
Step-by-step guide for replacing the saw blades.
Overview of the machine's control panel buttons and their functions.
Steps to commission and prepare the machine for use.
Instructions on how to operate the machine for cutting.
Conditions under which maintenance operations must be performed.
Steps to isolate the machine from power sources before maintenance.
General safety precautions to observe during maintenance.
Recommended cleaning procedures and frequency.
Information on the automatic lubrication of mechanical parts.
Schedule and procedures for routine maintenance.
Safety recommendations for maintenance and repair personnel.
Table to help identify and resolve common machine failures.
How to contact support for information or assistance.
A list of recommended spare parts for the machine.
Instructions on how to order spare parts.
General statements or declarations related to the document.
References to attached diagrams like mechanical, electrical, and pneumatic schemes.
To Next Page
General