FIRE BRIGADE RESPONSE GUIDE
Responding to a Fire
Access Level 1
The indicator will be illuminated. The applicable zone indicator will
also be illuminated and more detailed information of the Loop, Sensor and Zones in alarm are displayed on
the LCD as follows.
FIRST ALARM: L1 D1 Z1 15:31
D.DSC:Loop 1 Sensor 1
Z.DCS:Zone 1
LAST ALARM: L4 D49 Z5 15:31
D.DSC:Loop 4 Sensor 49
Z.DCS:Zone 5 Depend C
PRESS PREVIOUS/NEXT TO VIEW OTHER ALARMS
AC:2Z ALM:5 PALM:0 FLT:0 DIS:0
The button is pressed to override any delays to outputs
The button is pressed to silence the buzzer
Access Level 2
The button is pressed to turn ON all alarm devices.
The button is pressed to silence any silence-able outputs that have been activated.
The will be illuminated to indicate that the silence-able outputs have been silenced and resound
is available.
The operation of the SILENCE button will be logged.
The button is pressed to reset the fire condition. All outputs activated in response to the fire will
deactivate and the panel will revert to the normal condition providing there are no other abnormal conditions
present. – RESET IS LOGGED.
To Next Page
Loading...
