Need help?Do you have a question about the Ampac FireFinder PLUS and is the answer not in the manual?
General| Brand | Ampac |
|---|---|
| Model | FireFinder PLUS |
| Category | Fire Alarms |
| Language | English |
Essential precautions to prevent damage to FACP components from static discharge.
Safety guidelines for disconnecting power before working on FACP components.
Overview and operation of the main controls on the FACP panel for system management.
Includes Silence Buzzer, Alarm Silence/Resound, navigation, reset, and disable/enable functions.
Indicators for POWER FAULT, SYSTEM FAULT, EARTH FAULT, and general FAULT.
Indicators for TEST, PRE-ALARM, DISABLED, and ALARMS SILENCED.
How to display all alarms present on the system via the main menu.
Initiate zone or device alarm tests to verify system functionality.
Initiate zone or device fault tests to verify system fault detection.
Configure sounder enable, disable, re-trigger, and current status.
Configure all zone delay settings to be ON or OFF.
Initiate a walk test for zones or devices to check operation.
Conduct a loop test for diagnostic testing, indicating leg being tested.
Turn on a device LED for testing purposes; LED turns off automatically.
Programming for conventional zones, including description and type strings.
Editing device descriptions, types, and output configurations.
Adding, editing, or deleting inputs in a panel or loop.
Adding, editing, or deleting outputs in a panel or loop.
Explanation of the three operational states: Power Up, Normal, and Fault.
Explanation of agent discharge modes (automatic and manual) and sequences.
Details on the Agent Release Module's functions, controls, and indicators.
Description of the LCS, its indicators, manual release switch, and interlock input.
Interfaces for FACP, LCS, monitored inputs, and gas-fired outputs for agent release.
Guidelines for daily, monthly, quarterly, and annual maintenance of the FACP.
Common problems and their solutions for the FireFinder PLUS system.
Minimum tests required for commissioning the FireFinder PLUS system.
Checklist for verifying equipment design, installation, compatibility, and performance.
To Next Page
