5
Front, Rear, Side, and Bottom Panel Descriptions
1. Input: Connect a passive or active instrument to this Input jack.
2. Thru: Unaffected output for use with either a tuner or clean signal to amplifier.
3. Aux Input: Input for an MP3 player or other music source. The Aux Input signal appears in the headphone output only.
4. EQ On/Off Switch: Turns the EQ on/off. The LED indicates EQ on/off.
5. Volume: Adjusts the overall output level.
6. EQ Knobs: Boost or cut the levels at certain frequencies to enhance the sound.
7. Ultra Hi/Ultra Lo Switches: Boosts high or low frequencies.
8. Aux Level: Adjusts the Aux Input level.
9. Scrambler On/Off Switch: Turns the Scrambler effect on/off. The LED indicates Scrambler on/off.
10. Scrambler Drive: Adjusts the amount of Drive.
11. Scrambler Blend: Blends the Scrambler effect-processed signal with the clean bass signal.
12. Gnd/Lift: Connects the ground connection at the balanced Output jack
13. XLR/Line Out: Feeds the signal to an external power amplifier, mixer or recording setup.
14. Headphones: Connect stereo headphones here.
15. Power: Input socket for optional AC/DC power supply.
16. Battery [not included]: Provides 9V of power (accessible by unscrewing the four feet on the bottom panel).
17. Pad: Reduces input level by 15 dB.
To Next Page
Loading...
