Ampeg SVT-CL Disassembly Procedure

ESD Warning:
To avoid damage by electrostatic discharge please use ESD precautions.
MODEL(S) 9/6/2012
SVT-CL
SVT-Heritage
Page 1 of 11
Disassembly Procedure
Tools Required:
Safety Glasses
ESD Precautions
Needle Nose Pliers
Socket(s)
Screwdriver(s) Phillips Head #1, #2
Wire Cutters
Safety Warning:
Caution! These instructions are for use by qualied personnel only. To avoid electric shock, do not per-
form any service unless you are qualied to do so. Refer all service to qualied personnel.

Ampeg SVT-CL Specifications

Power

output power rating	300 watts RMS
power requirements	115VAC, 60Hz, 460VA; 100/115VAC, 50/60Hz, 460VA; 230VAC, 50/60Hz, 460VA

Tone Control Range

bass	±12dB @ 40Hz
midrange	+10dB, -20dB @ 220, 450, 800, 1.6k or 3kHz
treble	+15dB, -20dB @ 4kHz
ultra low	+2dB @ 40Hz, -10dB @ 500Hz
ultra high	+9dB @ 8kHz

System Specifications

total system gain	67dB @ 1kHz
signal to noise ratio	80dB typical
tube complement	12AX7 (3), 12AU7 (2), 6550 (6)

Weight and Dimensions

size (W x H x D)	24” W x 11.5” H x 13” D
weight	80 lbs