OM024-6 Model 240 Operating Manual Page 1
1 Introduction
Thank you for purchasing an Amplivox audiometer. The Amplivox Model
240 is a diagnostic audiometer that will give many years of reliable service
if treated with care.
1.1 Intended applications
The Model 240 diagnostic audiometer is designed for use by audiologists,
general practitioners, hearing aid dispensers and child health
professionals. It is capable of undertaking both air conduction (AC) and
bone conduction (BC) tests with or without masking.
The instrument is completely portable, and if required may be specified to
operate from internal batteries (see Section 2.3 below). Test results may
be printed using the specified printer option or transferred to a PC running
the NOAH application or Amplivox AudiView.
1.2 Unpacking
Open the shipping carton and carefully remove all the equipment. Check
against the delivery note that all the accessories ordered have been
included with your audiometer. If anything is missing, please contact
Amplivox Customer Support (+44 1865 880846; sales@amplivox.ltd.uk). If
you have purchased from a distributor you should contact them directly.
Please retain the shipping carton and packing materials as the audiometer
will need calibrating on an annual basis and should be returned to
Amplivox in its original shipping carton.
1.3 Firmware version
This operating manual is for firmware versions 4v47 onwards. To check
the version of firmware on your audiometer press and hold the MENU
button followed by the TALKOVER button.
1.4 Standard contents
Model 240 Audiometer Audiometric headset
Bone vibrator headset Patient response switch
Mains adapter Audiogram cards
Operating manual & AudiView NOAH Audilink software
Carrying case Calibration certificate
To Next Page
Loading...
