Need help?Do you have a question about the Ampro XA1000 and is the answer not in the manual?
Critical safety rules for amplifier operation, environment, and electrical handling.
Overview of the XA Series amplifier's professional design, quality, reliability, and rack-mountable form factor.
Details custom chassis, symmetrical layout, Class G operation, switch-mode PSU, cooling, and connectivity.
Lists inrush current suppression, input muting, overvoltage, RF suppression, short-circuit, overload, and thermal protection.
Explains power switch, logo/indicator, fault indicator, attenuators, VU meter, and clip indicator.
Details balanced inputs, signal strapping, ground lift, binding posts, speaker connectors, mains inlet, and mode switch.
Covers power requirements, rack mounting dimensions, and proper airflow for cooling.
Guides for connecting audio sources and speakers, including balanced/unbalanced inputs and connector types.
Addresses common hum issues, their causes, and solutions using the ground lift switch.
Ensures correct setup and follows the proper sequence for powering the amplifier on and off.
How to adjust input levels, understand sensitivity, and avoid clipping for optimal output.
Instructions for fan maintenance and an overview of the amplifier's internal signal flow.
Detailed specifications for the XA1000 model, including power output and dimensions.
Detailed specifications for the XA1400 model, including power output and dimensions.
To Next Page
General