PAGE 3XA1000 & XA1400 INSTALLATION AND OPERATION MANUAL
Congratulations on choosing Australian Monitor for your professional
amplifi cation requirements.
The design of our XA Series Audio Power Amplifi ers embraces all the aspects of
a well designed amplifi er. The visual design, mechanical,
electrical and sonic parameters, along with our dedicated manufacturing
process, have all been optimized to provide a professional tool that exhibits
quality, reliability and longevity.
The XA Series amplifi ers are 2 unit (3.5”) high, 19” wide, rack
mountable units.
Each channel of the amplifi er comprises a balanced active input with a
buffered attenuator driving a drive stage which in turn drives a fan-cooled
output stage. The amplifi er operates from a high current-capable switch-mode
power supply.
These amplifi ers have been specifi cally designed to deliver their high power
output with minimal distortion, and provide the critical degree of control required
by your speakers.
AUS, EUR, USA
Copyright 1st August 2008
Rev A: 01/08/08
This symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the products enclosure that may be of suffi cient
magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important
operational and maintenance (servicing) instructions in the literature
accompanying the appliance.
To prevent electric shock do not use this (polarised) plug with an extension
cord, receptacle or other outlet unless the blades can be fully inserted to
prevent blade exposure. To prevent electric shock, match wide blade of
plug to wide slot, fully insert.
Caution:
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK),
NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED SERVICE PERSONAL.
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
INTRODUCTION AND CONTENTS
INTRODUCTION 3
FEATURES 4
PROTECTION FEATURES 5
CONTROLS, CONNECTORS & INDICATORS 6–7
INSTALLATION 7–8
OPERATION 9
MAINTENANCE 10
SPECIFICATIONS 11
To Next Page
Loading...
