Remote Control
500A | 75mV Shunt
Equipment
Remote and Shunt
Remote + Shunt
04
Battery Voltage
Battery display Ah remaining
Net current in / out
Power - voltage x amperage.
10mm bolts | 40mm long
Mounting bracket
8-80VDC - Positive connection block
Remote Control Connection
500A shunt
Bluetooth Dongle, inside remote
Time remaining until charge / discharge
State of Charge SOC%
okay | confirm button during setup
Screen brightness down | down in menu settings
Screen brightness up | up in menu settings
Back button | back to home screen
Operational buttons
To Next Page