__________________________________________________________________________________________
The information, knowledge, and graphic material contained in this documentation is the sole property of AMROTEC® and may not be reproduced or
otherwise distributed without the prior written consent of AMROTEC® reserves the right to enforce all rights in this connection, especially in the event that
patents are granted. Provision of the documentation does not establish grounds for any claim to a license or right of use.
MIB-11F
File Name: FAQ_20201129_MIB11F
Date: October 3, 2020
2 Pocket Discriminator
Product Support
How to adjust Fitness Detectors on MIB-11F for ATM, FIT1 and FIT2
‘FITNESS” Function discriminates banknotes between fit for further circulation or Unfit to return to Federal Reserve Bank
according to their guideline. Unfit banknotes are determined by level of stains, holes and graffiti etc. and sends to the
designated pocket. There are 8 parameter of the Fitness standard as defined below:
Fitness conditions
Missing corner: Missing a portion / segment of the banknote
Stain: Localized concentration of dirty
Soiling (Dirty): General Distribution of dirt across the entire banknote
Tapes: Clear tape on the banknotes
Holes: Holes appear on banknote
Tear: A portion of banknote is missing or torn
Corner folded (Dog-ears): Any corner of banknote is folded
Graffiti (Including stamp): Deliberate graphical alteration of the banknote
Using of MIB-11F Touch Screen, user can select FITNESS function (ATM, FIT1 or FIT2) or turn it off.
①
②
③
④
⑤
⑥
⑦
⑧
To Next Page
Need help?
General
