Using APWeb
22
APWeb Instruction Manual
Using APWeb
This chapter starts with four easy steps for connecting to APWeb after the initial setup by the Network
Administrator. It explains how to use APWeb’s two control options for executing and disconnecting
switches: the XBar Controller (a crosspoint interface) and Macros (which are programmed by the
Network Administrator).
Connecting to APWeb
To connect to the APWeb server:
1.
Launch a browser on your PC.
2. Type http://192.168.0.251 (or the address provided by the Network Administrator) in the address
bar of the browser and press Enter.
The Enter Network Password dialog box opens.
3. Enter the user name and password (both are case sensitive) provided by your Network
Administrator.
The default user name and password are none and none (the actual character string n-o-n-e).
4. Click OK.
The APWeb Home page opens.
To Next Page
Loading...
Need help?
General