Appendix H – Supported Output Resolutions
292
Hardware Reference Manual – Enova DGX 100 Series Digital Media Switchers
IMPORTANT: The resolutions and timings in the list below are supported by HDMI and DXLink outputs using SmartScale. They can be
set manually via DGX Configuration Software (except for 4K resolutions).
CTA 861:
640x480@60Hz
720x480@60Hz
720x480@120Hz
720x480@240Hz
720x576@50Hz
720x576@100Hz
720x576@200Hz
1280x720@50Hz
1280x720@60Hz
1280x720@100Hz
1280x720@120Hz
1440x480@60Hz
1440x576@50Hz
1920x1080@24Hz
1920x1080@25Hz
1920x1080@30Hz
1920x1080@50Hz
1920x1080@60Hz
2560x1080@50Hz*
2560x1080@60Hz*
3840x2160@23/24Hz*
3840x2160@25Hz*
3840x2160@29/30Hz*
3840x2160@50Hz*^
3840x2160@59/60Hz*^
4096x2160@24Hz*
4096x2160@25Hz*
4096x2160@30Hz*
4096x2160@50Hz*^
4096x2160@59/60Hz*^
*Resolution requires end-to-end (source, transportation, destination) 4K equipment.
^Resolution is only supported in Passthrough Mode with 4:2:0 chroma sub-sampling.
NOTE: The Consumer Technology Association (CTA) was formerly known as the Consumer Electronics Association (CEA): the CEA
861 video standard has been renamed to CTA 861.
To Next Page
Loading...
Need help?
General
