AMX MXT-1000 - Page 11

Modero X® Series Touch Panels
3
MXD/T-1000 10.1" Modero® X Series Touch Panels
MXT-1000 Specifications
Power Requirements: PoE (Power over Ethernet), 802.3af, class 3
Power Consumption: • Full-On: 8W maximum
• Standby: 3.2 W
• Shutdown: 1 W
Front Panel Components:
NFC Transceiver: Antenna and transceiver for Near Field Communications device detection and
interaction.
Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness.
Motion Sensor: Proximity detector to wake the panel when it is approached.
• Typical Range: 1 foot (30.48 cm)
• Maximum Range: 3 feet (91.44 cm)
• Range width: 10 degrees
LED Indicator: Camera active indicator
Sleep Button: Single button on top of panel for placing panel in sleep mode, for powering off
the panel, and for accessing the Settings Pages.
Microphone: -42dB ± 3dB sensitivity FET microphone
Speakers: 4 ohm, 2 Watt, 300Hz cutoff frequency
Camera: HD 720P camera for video conferencing/video chat support.
Rear Panel Components:
USB connections: 2 easily accessible USB ports on rear of base, used for connection to
keyboard, mouse, or USB drive.
Micro-USB Port: 5-pin Micro-USB connector used for camera video and microphone output
only.
Ethernet 10/100 Port and
Cable:
10/100 Base-T RJ-45 connector for Ethernet connectivity and PoE.
Touch Panel Display:
Display Type: TFT Active Matrix Color LCD with In-Plane Switching (IPS) technology.
Display Size: 9.9" x 6.7" (252 mm x 170 mm), 12.0" (304 mm) diagonal
Viewable Area: 8.5" x 5.3" (217mm x 136mm), 10.1" (257mm) diagonal
Viewing Angle: • Vertical: ± 89°
• Horizontal: ± 89°
Screen Resolution
(W x H):
1200x800
Aspect Ratio (W x H): 16x9
Brightness: 400 cd/m2
Contrast Ratio: 1000:1
Color Depth: 264K colors
Backlight Type: LED
Touch Overlay: Projected Capacitive; Multi-touch support, 3 simultaneous max.
Communications:
Ethernet: 10/100 port, RJ-45 connector and cable. Supported IP and IP-based protocols:
UCP, TCP, ICMP, ICSP, IGMP, DHCP, Telnet, FTP, DNS, RFB (for VNC), HTTP
USB: 2 - USB host 2.0, Type A ports
Near Field Communications
(NFC):
Supports standards ISO/IEC 15693, ISO/IEC 14443A, ISO/IEC 14443B;
Unique Identifier (UID), Typical Range = .25”, Maximum Range = .5"
Bluetooth: HID Profile v1.1, Keyboard/Mouse Support, requires MXA-BT Bluetooth
Adapter.