To Next Page
R
Randy ReillyAug 6, 2025
What to do if I observe audio and video drift on my AMX MST-431?
- BBrenda EstradaAug 6, 2025
If you notice a drift between audio and video during streaming on your AMX Touch Panel, especially from a non-MXA-MPL source like a Vision 2 streaming server, you can try the following: To reduce drift for Vision 2 H264 streaming, use video transcoding tools (such as HandBrake or FFMPEG) to convert H.264 video into lower bitrates, reduced resolution, and/or lower H.264 profiles. If this doesn't work, try transcoding the stream into MPEG2 video, which is less prone to A/V drift.
General
