Need help?Do you have a question about the AMX NXI and is the answer not in the manual?
General| Memory | 2 GB DDR3 |
|---|---|
| Ethernet | 10/100/1000 Mbps |
| RS-232/422/485 Ports | Up to 8 |
| Relay Ports | Up to 8 |
| I/O Ports | Up to 8 |
| GPIO Ports | Up to 8 |
| Power Supply | 100-240VAC, 50-60Hz |
| Storage | 8 GB |
| IR/Serial Ports | 8 |
| IR Ports | Up to 8 (configurable as IR or Serial) |
| USB Ports | 2 (USB 2.0) |
Describes the front panel components and LED indicators of the NXI controller.
Details the rear panel connectors, ID pushbutton, and ICSP LED of the NXI controller.
Details power requirements, memory, enclosure, dimensions, and heat dissipation of the NXI.
Lists and describes components located on the NXI's front panel, including card slots and LEDs.
Details components found on the NXI's rear panel, such as ports, pushbuttons, and LEDs.
Covers product certifications and lists included and optional accessories for the NXI.
Guides for installing cards and preparing wires for NXI connections.
Details wiring for RS-232/422/485, Relay, IR/Serial, and I/O ports on the NXI.
Covers overview, ID button, D:P:S notation, and general port commands.
Details commands for RS-232/422/485, IR/Serial, and I/O ports for device control.
To Next Page
