AMYET EV900S - Page 16

AMYET EV900S E-bike
14
ASSEMBLY
Take out the headlight, open the patch on
both sides of the headlight, and put the
headlight with one end of the line down
and the other end up, connect cables to
the headlight;
1
Take out the screw and gasket, remember
to put the gasket first and then the screw,
and lock it with a screwdriver;
2
Secure the left and right sides of the front
fender to the positions shown on the two
sides of the front fork;
2
Put the front fender through as shown in the
picture;
1
3.Front fender
4.Headlight