AMYET EV900S - Page 17

AMYET EV900S E-bike
ASSEMBLY
Locate the right-side/ left side pedal,
which is marked "R," "L,"should have an
"R""L," sticker attached;
1
Thread the right pedal onto the right crank
gently by hand, turning clockwise,Then
tighten pedal by allen wrench;
2
Thread the left pedal onto the left crank
gently by hand, turning counter-clockvsise.
Then tighten pedal by allen wrench;
3
5. Handlebars
Note: If the pedal/ chain doesn't run smoothly or something seems
misaligned, please contact AMYET Support.
15