What to do if my amzchef Food Processor stops working during operation?
If your amzchef Food Processor stops working during operation, it could be due to low voltage. Check if the voltage is too low. Alternatively, the motor may have overheating protection activated. In this case, allow the chopper to cool down for 20-30 minutes before resuming use.
Why is my amzchef Food Processor making abnormal vibrations or loud noises?
If you experience abnormal vibration or loud noise with your amzchef Food Processor, there could be several reasons. Ensure the blade assembly is correctly installed. Also, check that the product is placed on an even surface. High voltage or excessive food materials can also cause this issue. If there is high voltage, please check the voltage. If the food materials is too much, release the switch, disconnect the power supply, and remove some of the food.
What to do if the blades get stuck in my amzchef Food Processor?
If the blades of your amzchef Food Processor get stuck, it's likely that the blade was entangled or jammed by food materials. To resolve this, release the switch, disconnect the power supply, then take out the ingredients and cut them into smaller pieces.
How to fix an amzchef Food Processor that does not work after connecting to power?
If your amzchef Food Processor doesn't work after connecting it to power, the cover lid might not be installed correctly. Please ensure that the cover lid is properly installed.
Why does my amzchef Food Processor have a bad smell?
If your amzchef Food Processor has a bad smell after using it several times, please contact our service department.
General| Model Number | FC-J18 |
|---|---|
| Power | 1000W |
| Bowl Capacity | 1.8 L |
| Material | Plastic |
| Speed Settings | 2 |
| Pulse Function | Yes |
| Type | Food Processor |
| Voltage | 120 V |
| Capacity | 1.8 L |
| Accessories | Chopping blade |
To Next Page