Analog way Pulse² - Page 66

66
8.3.6 Working with nave Matrix mode

To acvate the nave Matrix mode:

You’ll nd all menus from the Mixer mode in the main menu except some specic matrix funcon added.
To work with nave Matrix mode, you have to use the Matrix # buons rst.

Press TAKE to view the result on both screens
Don’t forget to press the correct Matrix # buon before pressing the Layer selecon buon, in order to be
sure doing the manipulaon on the correct output.

All the transions (Cut, Fade or Transions) are available in the nave Matrix mode. Although the Matrix
mode is acvated, you will be able to perform powerful transion eects seamlessly. It can depend on your
conguraon.
The Pulse² has 4 scalers, to understand how your eect will be performed, you need to know how many
scalers are used on your outputs. Don’t forget that you always need one free scaler to perform seamless
transions.
Example:

The frame and the logos are not considered as live layers and are not counted as using a scaler.

In Matrix mode, you will nd a new menu into Preset menu called “Preset management”. This will help you
to dene what kind of preset you want to save:
 preset saved for both outputs,
 preset saved only for the current output,
 preset saved only for output #1,
 preset saved only for output #2.

Please see the Mirror mode features. (page 44)