Do you have a question about the Analog way Pulse 2 and is the answer not in the manual?
Brand | Analog way |
---|---|
Model | Pulse 2 |
Category | Music Mixer |
Language | English |
General safety and operating instructions for optimal use and to prevent risks.
Details electrical levels and impedance for various analog and digital signal types.
Details on the Pulse²'s 8 seamless inputs, including plug types and formats.
Information on standard and video outputs for Pulse² models, including formats.
Details on serial, LAN, and HDBaseT communication interfaces and protocols.
Explains HDCP detection, classification, and management for protected content.
Identifies and describes the connectors and controls on the front and rear panels of Pulse² models.
Identifies and describes the connectors on the rear panel of the PLS350 model.
Identifies and describes the controls and displays on the front panel of the PLS350 model.
Lists the recommended system requirements for using the RCS² software.
Guides on how to connect the computer to the Pulse² unit using LAN for RCS² control.
Details on setting up the unit via the RCS² interface, including modes, audio, and screens.
Configuration options for audio setup, including No Audio, Preset, and Routing modes.
Configuration for screen resolution, maximum layers, Quick Frame, and background color.
Manages output resolutions, formats, sync types, test patterns, and HDCP status.
Configures inputs, including active plugs, signal types, and HDCP settings.
Detailed management of audio levels, balance, and source mapping for inputs and outputs.
Tools for creating and managing presets, including layer adjustments and effects.
Saving, loading, and managing presets for the Pulse² unit.
Operating the Pulse² in Live mode for easy operation after creating presets.
Configuration settings for the Mixer mode, including input and output selections.
Creating user-defined presets by configuring screens and layers.
Recalling and using saved presets during a show.
Managing audio settings for inputs and outputs, including modes and levels.
Configuration for Matrix mode, including input/output selection and layer management.
Saving presets specifically for Matrix mode outputs.
Explains HDCP as a content protection mechanism and its implications for Pulse² usage.