Analog way Pulse 2 - 7. OPERATING THE PULSE² FROM THE RCS²; 7.2 Setup

34
7.1 Operang mode

7. OPERATING THE PULSE² FROM THE RCS²
7.1 
Before you start seng up your Pulse² for the rst me, take some me to think about how you will be using
it. The Pulse² oers a choice of two operang modes, which results in a versale video producon tool for
live event staging and xed installaon applicaons.
NOTE: We recommend reseng the device to its default values every me you set up your shows or events.
This mode allows for a single Pulse² to
seamlessly switch any of its 8 analog/
digital inputs with any other of the inputs,
add PIP, tling or logo inseron to the live
frame, while previewing your every move
before going live, to avoid embarrassing
errors on your main screen.
Frame
Layer A
Layer B
Logo 1
Quick Frame
Logo 2
Background
Foreground
Go to the setup secon to start to set up
your unit. A Setup assistant is available
to help you to correctly adjust all basic
setups of your unit.

7.2 Setup
The device can work in 2 dierent modes, Mixer mode or Matrix mode.
