Analog way Pulse 2 - 8.3.6 Working with Native Matrix Mode; 8.3.7 Working with Cut, Fade or Transitions

69
8.3.6 Working with nave Matrix mode

To acvate the nave Matrix mode:

You’ll nd all menus from the Mixer mode in the main menu except some specic matrix funcon added.
To work with nave Matrix mode, you have to use the Matrix # buons rst.

Press TAKE to view the result on both screens
Don’t forget to press the correct Matrix # buon before pressing the Layer selecon buon, in order to be
sure doing the manipulaon on the correct output.

All the transions (Cut, Fade or Transions) are available in the nave Matrix mode. Although the Matrix
mode is acvated, you will be able to perform powerful transion eects seamlessly. It can depend on your
conguraon.
The Pulse² has 4 scalers, to understand how your eect will be performed, you need to know how many
scalers are used on your outputs. Don’t forget that you always need one free scaler to perform seamless
transions.
Example:

The frame and the logos are not considered as live layers and are not counted as using a scaler.
For Pulse
2
- Ref. PLS350-3G and Ref. PLS350-H only
  Availability
Output #1

YES
Output #2

Matrix mode only
Output #1 & #2 side by side

Tiled
OUT #1 OUT #2 Matrix mode only
Output #1 & #2 Top and Boom

Tiled
Matrix mode only
OUT #1
OUT #2
In nave Matrix mode, the menu “Cong.ode” allows you to choose recording Output #1 or Output #2.
In Matrix mode, the SDI output embeds audio from Output #1 and Output #2.