Analog way Pulse 2 - 7.2.10 Audio Management

43
7.2.10 Audio management
The audio secon permits the management of level, balance, and other audio sengs for each input.

Before modifying the audio sengs, be sure to check the audio
input mapping. Each video input has one audio source mapped to
it. The audio mapping conguraon is found under Menu > Inputs
.
Into the AUDIO SETTINGS:
To display only the Current audio input which is played, click on
Current buon.
If you want to select which audio input will be displayed, click on
the list buon then select the input audio source you
want.