Analog way Pulse 2 - 7.2.10 Service management; 7.2.11 Control management

45
7.2.11 Service management
Into the service secon, you will nd tools.
Under IMPORT / EXPORT, you
have the possibility to export
or locally import the Local
Presets, the Thumbnails and
the Shortcuts.
The TEMPERATURE and HARDWARE INFO secons provide via alarm tabs the status of
the PFGA and boards
TECHNICAL SUPPORT: Display the dierent technical support contacts depending on your area.
In this menu, all specic sengs, which cannot be sorted under the other menus, are listed:

The interface loaded into the unit uses the IP conguraon.
Under INTERFACE, you can dene a new:
- IP address
- Netmask
- Port: choose the port
EDID
Under this secon, you can manage the EDID library, and
congure the EDID inputs if needed by dragging and dropping
from the EDID Library secon to the inputs

Under funcon, you can edit:
the internal real me clock,
  when this feature is enabled, you will be
locked out from selecng empty inputs that have no source
connected,
 adjust the brightness of your LCD,
 adjust the brightness of your keyboard.

