EasyManuals Logo

Analog way Pulse 2 User Manual

Analog way Pulse 2
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
35
7.2.2 Audio

This mode turns your Pulse² into a true 8 x 2 scaled
matrix, while preserving seamless switching capabilies.
Program 1 and Program 2 outputs can be set to dierent
resoluons and rates. Switching between any of the
inputs can be done with the various eects (Cut, Fade,
Slides…) and synchronized on both outputs.
In this secon, you will setup the audio of your device, you have several modes. In all modes, you have the
possibility to output the audio in AES3 or SPDIF:
NO AUDIO: the audio of your device is switched o
PRESET MODE: the standard mode of use of the device
You have two possibilies:
the sound on the output will follow the audio input of the top
layer.
Breakaway: when breakaway is acvated, the audio on the output is
memorized into the preset. A change of preset, changes the audio on the
output. A change of content into a video layer has no eect on the audio.
ROUTING MODE: in this conguraon, simply choose an audio input to
assign it to the output. The audio conguraon remains the same during
the show.
In this example input1 is on out1 and input 2 is on out 2.


Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Analog way Pulse 2 and is the answer not in the manual?

Analog way Pulse 2 Specifications

General IconGeneral
BrandAnalog way
ModelPulse 2
CategoryMusic Mixer
LanguageEnglish