VIO 4K - Ref. V701
QUICK START GUIDE
Thank you for choosing Analog Way and the VIO 4K. By following these simple steps, you will be able to set up and
use within minutes your brand new Video Processing Tool Box. Discover the VIO 4K capabilies and intuive interface
designed to meet all needs in terms of image processing and conversion.
• 1 x VIO 4K (V701)
• 1 x Power supply cord
• 1 x Ethernet cross cable (for device control)
• 1 x MCO 5 pin connector
• 1 x Web-based Remote Control Soware included and hosted on the device
• 1 x Rack mount kit (the parts are stowed in the packaging foam)
• 1 x User manual*
• 1 x Quick start guide*
* The User Manual and the Quick Start Guide are also available on www.analogway.com
You can quickly control and congure your new VIO 4K unit from the VIO 4K unit itself, via the front panel buons and
the front panel menu tree.
CAUTION!
Addional support such as
the rear rack or slide rails is
strongly recommended for all
mounng applicaons.
Go to our website to register your product(s)
and be noed about new rmware updates:
hp://bit.ly/AW-Register
• Rotate the front panel control knob and press the
ENTER and EXIT/MENU buons to navigate through
the menus and adjust your setup.
• Select the input to display on the output by choosing
the corresponding INPUT SELECTION buon, or use
BLACK to output to the screen background color.
1. Set up your outputs and outputs plugs
2. Set up your inputs and inputs plugs
3. Import frames and manage frame features
4. Set up the audio and manage A/V mapping
5. Access technical support informaon and device
control services
6. Create custom formats, manage transions, adjust
the screen background color …
7. Manage the device sengs and control funcons like
LAN and the Safe Input Select feature
8. Adjust the LED wall area of interest (AOI) and set up
the view
9. Save and load preset conguraons
10. Check your current VIO 4K conguraon
QUICK SETUP & OPERATION
WHAT’S IN THE BOX
Front panel menus on LCD display
10
1 2
67
3
49
58
• Switch ON the unit to access the front panel menu tree: