Need help?Do you have a question about the Analog way VIO 4K and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| 4K UHD | Yes |
| HDCP | HDCP 2.2 |
| Scaling | Yes |
| Seamless Switching | Yes |
| Power Supply | 100-240V AC, 50/60Hz |
| Inputs | 4 x HDMI |
| Outputs | 4 x HDMI |
| Maximum Resolution | 4096 x 2160 |
| Audio Support | Embedded audio, analog audio |
| Control | Ethernet, RS-232 |
| Dimensions | 1 RU, 19" x 1.75" x 15.75" (482.6 x 44.45 x 400 mm) |
Lists the main technical and functional features of the VIO 4K unit.
Provides detailed technical data on dimensions, weight, power, and warranty.
Safety and operating instructions in English, covering electrical hazards, power, connections, and servicing.
Safety and operating instructions in French, covering electrical hazards, power, connections, and servicing.
Safety and operating instructions in Italian, covering electrical hazards, power, connections, and servicing.
Safety and operating instructions in German, covering electrical hazards, power, connections, and servicing.
Safety and operating instructions in Spanish, covering electrical hazards, power, connections, and servicing.
Explains how to operate and configure the VIO 4K using its front panel buttons and menu tree.
Details how to configure output, input, and audio settings via the front panel.
Explains the Web RCS interface for remote control of the VIO 4K.
Guides users on how to connect to the VIO 4K's Web RCS interface using a standard LAN network.
Instructs users on connecting to the VIO 4K's Web RCS interface via a USB connection.
Explains how to operate the VIO 4K unit using the loaded Web RCS interface.
Guides on setting up the LAN connection for the VIO 4K, including DHCP and manual IP configuration.
Explains how to enable USB device connections for mass storage or Ethernet over USB.
Guides on resetting the device to factory settings or default configurations.
Explains how to save and export device configurations for backup purposes.
Covers erasing input settings, view memories, and preset memories from the device.
Provides information on updating the VIO 4K unit's firmware.
Guides on controlling the output format conversion environment by setting up format and plug.
Guides on optimizing outputs by setting up each plug, including signal type and color space.
Explains HDCP compliance for inputs/outputs and how enabling/disabling affects the stream.
Explains setting up output formats using internal reference, Auto EDID, Framelock, and Genlock modes.
Guides on using a video reference for Framelock mode to set up formats.
Explains how to use a Genlock reference input to set up the output format.
Covers adjusting colorimetry (Gamma, Brightness, Contrast, etc.) for output images.
Guides on requesting automatic setup for all inputs and plugs.
Explains how to access the input setup menu for configuration.
Details how to manage EDID preferred formats for input plugs.
Explains HDCP compliance for input plugs and how to enable/disable it.
Guides on adjusting input image colorimetry (Brightness, Contrast, Hue, Saturation).
Guides on correcting signal aspect ratio and cropping images.
Explains how to control input display by adjusting view settings and using fill templates.
To Next Page
