10. Select Load to Device to load the imported configuration on the device.
NOTE: This action will restore your device with the selected categories. Alternatively, you can select Save configuration to
device storage to save the imported configuration to the device storage without loading it on the device. SEE also: Saving
a configuration to the device storage.
The device memories are settings that have been saved to the device either automatically (like input settings
memories) or by user action (like frames and user EDIDs, or preset, view and custom format memories).
To erase all input settings memories:
Front Panel
1. Enter the CONTROL menu on the Front Panel interface.
2. Scroll down and select Reset/Erase to access the reset and erase menu.
3. Select Reset Input Settings Memories to start clearing up input settings memories:
• Select YES to confirm (/!\ this action is irreversible).
• Select NO to cancel.
Web RCS
1. Go to the Setup menu on the Web RCS interface.
To Next Page
Loading...
Need help?
General
