TIP: Check the VIO 4K Audio Block Diagram for a full overview of all VIO 4K audio capabilities.
The VIO 4K allows you to adjust up to 8 audio mono channels (4 stereo pairs) per input independently of the
video content.
You can for example add a delay to the audio to synchronize with the video, or enable the equalizer on a
channel pair to adjust the treble, mid and bass gains.
TIP: Link channel pairs to use the first channel pair settings for all pairs.
To link channel pairs:
Front Panel
1. Enter the AUDIO menu on the Front Panel interface.
2. Select Input Settings and select an input to set up the audio input.
3. Select a Settings Mode to set up the audio:
• Select BASIC to link channel pairs and use the first channel pair settings for all pairs;
• Select ADVANCED to unlink channel pairs and set up channel pairs individually.
To Next Page
Loading...
Need help?
General
