To wake up the device:
Press the ON/OFF button for about 3 seconds.
The front panel allows you to control and configure the VIO 4K framework directly from the VIO 4K unit itself,
via the front panel buttons and the menu tree on the LCD display.
To adjust the LCD display brightness:
Front Panel
1. Enter the CONTROL menu on the Front Panel interface.
2. Scroll down and select Front Panel to access the front panel settings menu.
3. Select LCD Brightness and rotate the control knob left or right to adjust the brightness of the front
panel LCD display:
• Select ENTER to save the new value.
• Select EXIT-MENU to restore the last saved value.
Web RCS
1. Go to the Setup menu on the Web RCS interface.
2. Click on the CONTROL tab to access the device settings and control functions.
3. In the left side toolbar, select Front Panel to access the front panel settings page.
4. Under LCD Brightness, click and drag the LCD brightness control bar right or left to adjust the
brightness of the front panel LCD display.
To Next Page
Loading...
Need help?
General
