Alternative method:
1. Go to the Setup menu on the Web RCS interface.
2. Click on the OUTPUTS tab to access the outputs setup page.
3. In the left side toolbar, select General to access the general outputs setup page.
4. Check the output status information next to the output preview window.
You can truly control your output format conversion environment by setting up the output format and plug.
You can also adjust the active area of your display in the output format (i.e. the output Area of Interest),
correct the output image, or use patterns to control the final rendering of the output in the screen.
The output plug status provides information on the current configuration of your output plugs.
Available plug status information includes:
• Status: Output plug status.
List of possible status for each plug include:
To Next Page
Loading...
Need help?
General
