To freeze the output:
Front Panel
Press the Freeze SHORTCUT button to freeze the output (click again or select another input to
unfreeze).
Web RCS
1. Go to the Edit menu on the Web RCS interface.
2. Click on the Freeze button at the bottom of the screen to freeze the output (click again or select
another input to unfreeze).
SEE: Creating frame captures
The Genlock input can be used as a reference and a rate multiplier to set up the output format (SEE: Setting
up the format).
If the Genlock input allows it, you can further specify the format to use on the Genlock reference input by
choosing from the list of formats detected on the Genlock input.
To Next Page
Loading...
Need help?
General
