To reset all image settings:
Front Panel
1. Enter the INPUTS menu on the Front Panel interface.
2. Scroll down and select an input to access the selected input setup menu.
TIP: Double-click on an INPUT SELECTION button to shortcut to the input setup menu directly.
3. Select Image Settings to access the input image settings menu.
4. Select Reset Settings to reset the input image without erasing the input settings memory.
Web RCS
1. Go to the Setup menu on the Web RCS interface.
2. Click on the INPUTS tab to access the inputs setup page.
3. In the left side toolbar, select an input to access the selected input setup page.
4. Click on the Signal tab.
5. Under STATUS, click on the Reset Image Settings button to reset the input image without erasing
the input settings memory.
Related topics:
• Resetting the device
The view of an input allows you to control how the input is displayed in the screen.
You can for example use pan and zoom to adjust the size and position of the input in the screen, create a
mask to display only a section of the input in the screen, or use the view alpha value to control the
transparency of the input in the screen.