To Next Page

To Previous Page

www.analogway.com

PROGRAMMER’S GUIDE

USER MANUAL

FORMAT NOT SUPPORTED

Plug disabled for this output because the format is not

supported

NO DISPLAY DETECTED

Plug is disabled because there is no display detected

CONNECTION FAILED (CHECK

CABLE)

Plug disabled because connection has failed

REFERENCE SIGNAL

INCOMPATIBLE

Plug disabled because reference used is not compatible with

plug standard

FORMAT NOT SUPPORTED BY

DISPLAY

Plug is disabled because the display is not compatible with the

format parameters

To check the status of your outputs:

Front Panel

1. Enter the OUTPUTS menu on the Front Panel interface.

2. Select STANDARD OUTPUT to access the standard output setup menu.

3. Select Output Status to check the output status information.

Alternative method:

1. Enter the SUMMARY menu on the Front Panel interface.

2. Under STANDARD OUTPUT, check the standard output status information.

Web RCS

1. Go to the Setup menu on the Web RCS interface.

2. Click on the OUTPUTS tab to access the outputs setup page.

3. In the left side toolbar, select STANDARD OUTPUT to access the standard output setup page.

4. Check the output status information next to the output preview window.

Analog way VIO 4K User Manual

Other manuals for Analog way VIO 4K