LFO2 SPEED
This is the speed of the sequence. The clock is taken from its own dedicated LFO.
SYNC
This sets the clock source for the sequencer.
INT
This selects the internal clock as the source - the rate/tempo set by the SPEED
knob.
NOTE0
MIDI Note zero is the clock source. Each time MIDI note zero is pressed, this is like
a clock, and the sequencer will advance by one.
EXT
An external clock can be used when this is selected. Feed an external analogue
clock, gate, or trigger, int the EXT CK socket.
To Next Page
Loading...