Ance
BD310
I/M readiness is to test misfire/fuel system/ comprehensive component
You can use the UP or DOWN key to select and press ENTER, shown as
follows:
Diagnostic Menu
Misfire monitor
Fuel system monitor
Comprehensive component
monitor
Cata Ystmonitor
Heated cata yst monitor
N/A means this vehicle is not available, INC means it is incomplete or not yet
ready, and 0K means it is completed or monitor 0K
4. Data Stream
Press UP or DOWN to select Data Stream from the main menu, then press
ENTER to confirm. The screen will display the interface shown below:
Diagnostic Menu
Read Codes
Erase Codes
WM Readiness
Freeze Frame
Evap System Test
Vehicle Information
— OBDII/EOBD+CAN
All Datastream
FUELSYSA
FUELSYSB
LOAD PCT
ECT
s H RTFTI
25
To Next Page
Loading...
