ANCEL SQ-129 User Manual

®
Light up anytime anywhere
Product Introduction
The ANCEL 3-in-1 led work light is the latest. Not only can you display the remaining
power status in real time, but also have 4 lighting modes, with a waterproof
coefficient of up to IP44, which can be used for car maintenance, outdoor camping
and emergency charging treasures to meet your lighting needs in the wilderness
and accompany your safety.
NOTE: Please read the user manual carefully before use and installation.
ANCEL 3-in-1 led work light
SPECIFICATIONS:
Model No. SQ-129
Battery 3.7 V 4400mAh
Color Black & Red
CCT 6500K
Luminous flux 1200 LM
Dimming Two levels of 50% /100% brightness
Lighting Mode 4 Lighting Modes
Intelligent power display 4 blue light indicators
Waterproof Rate IP44
LED Quantity 2COB /2XPE
Working Time 4-15 hours (2COB- 4hours ;2XPE-15hours )
Input/output 5V-1.5A
User Manual

ANCEL SQ-129 Specifications

General

Model	SQ-129
Category	Work Light
Light Source	LED
Power Source	Battery
Battery Type	Lithium-ion
Brightness	1000 Lumens
Waterproof Rating	IPX4
Material	ABS plastic
Charging Time	3-4 hours
Light Modes	High, Low, Strobe
Charging Method	USB
Dimensions	150mm x 45mm x 35mm

Summary

Product Introduction

Product Specifications

Details the technical specifications of the ANCEL 3-in-1 LED work light, including model, battery, color, CCT, and performance metrics.

Operation Instructions

2COB Light Operation

Explains how to turn the 2COB light on/off, adjust brightness levels, and cycle through lighting modes.

2XPE Light Operation

Details how to activate the 2XPE light and switch to SOS mode, requiring a 3-second press.

USB Charging and Power Bank Function

Covers connecting the device for charging and using it as a power bank via its USB output port.

Installation Methods

Describes magnetic, carabiner, and tripod installation options for the work light.

Important Safety Precautions

Includes warnings about direct eye exposure to LEDs and the necessity of charging before use.

Contact Information