Service Reset
Service Reset
Flexible Interval
Fixed Interval
3/3
Remark: Before setting the maintenance interval, do set the
corresponding [ oil quality ]
If vehicle uses UDS protocol, you could do inspection due reset,
service reset, and mileage and time settings. Settings of mileage
and time support be input manually with any value you want.
3. EPB reset
Choose [ EPB reset ], press [ 0K ] button to continue
OBDII
EPB reset
ETCS reset
For
BAT
O
Tool Setup
3
Oil reset
BMS reset
Information
1.Please turn the ignition ON
with engine OFF.
2.Release the handbrake.
0K ESC
3.1 Choose [ EPB replace brake pads l, press [ 0K ] button
to continue:
EPB ReplaceBrakePads
EPB ReplaceBrakePads
Retraction BrakePump
Release Brake Pump
1/3
13
Information
Perform this function
Are you sure?
0K
ESC
To Next Page
Loading...
