ANCEL VD700 - Page 15

Retract the brake pump , please pay attention to the operation
tips, and press [0K] button to continue:
EPB ReplaceBrakePads
Has been performed,
Press [0K] to continue.
Information
Replace the brake pads.
After finish, Press [0K] to
0K ESC
continue.
0K ESC
Information
Please check complete
retraction.
Press [0K] to continue.
EPB ReplaceBrakePads
Has been performed,
Press [0K] to continue.
0K
ESC
0K
ESC
3.1.1 Check whether the brake pump is completely released.
The operation of replacing the brake pads is finished, press [
0K ] to complete
Information
Please check completeretraction.
After check Press [0K] to
continue.
0K
ESC
14