ANCEL VD700 - Page 16

3.2 Choose [Retraction Brackpump] , press [ 0K ] to
continue:
Information
Perform this function
Are you sure?
0K ESC
3.2.1 After retract brakepump, press [ 0K ] to continue:
EPB ReplaceBrakePads
Has been performed,
Press [0K] to continue.
0K ESC
3.2.2 Check whether the retraction is completely, then start
to replace the brake pads. After finished, press 0K to
continue:
Information
Please check complete
retraction.
Press [0K] to continue.
0K ESC
15