1) LCD DISPLAY
pixels display.
2) [0K] BUTTON
3) ESC BUTTON
— Indicates test results. Backlit, 320 x 240
—Confirms a selection (or action) from a menu.
—Cancels a selection (or action) from a menu
or returns to the menu.
4) [LEFT ]SCROLL BUTTON -in the menu mode through the
menu and sub menu move to the left, when rolling in a data
interface, use the left button can be moved to the last screen.
5) [RIGHT] SCROLL BUTTON -In the menu mode through the
menu and sub menu item move to the right, when rolling in the
data interface, use the right button can be moved to the next
screen.
6) [UP] SCROLL BUTTON -in the menu mode through the menu
and sub menu item moving up. When retrieving data for more
than a screen by moving up the screen to the previous screen for
more data.
7) [DOWN] SCROLL BUTTON -In the menu mode through the
menu and sub menu item moves down. When retrieving data
more than one screen, by moving down the screen to the next
screen for more data.
8) OBD-16PIN CONNECTOR - Connects the scan tool to the
vehicle's Data Link Connector (DLC).
9) [I/M] BUTTON - Quick State Emissions readiness check and
drive cycle verification.
I/M Readiness
IGN
MIL
MIS
CCM
HCAT
Spark
Ø
DTC
PdDTC
EVAP
HRT
EGR
x
Remarks:
MIL Yellow- Dashboard MIL ON
MIL Gray-Dashboard MIL OFF
-not support
-complete
X -not complete
10) [READ DTC] BUTTON-Quick read the vehicle's fault codes.
4
To Next Page
Loading...
