Ancona AN-1137 - Step 18 - Install Grease Trays; Step 19 - Install Baffle Filters

— 16 —
Installation
STEP 19
Install Bafe Filters
• Hold the bafe lter by the two knobs.
• Place the front of the bafe against the interior
front of the range hood.
• Slide it up and push the rear of the lter back
until it sits securely.
• The bafe lters channel grease released
by cooking foods into the grease trays and
prevent aming foods on the cook top from
damaging the inside of the range hood. For
this reason, the bafelters must ALWAYS be
installed during range hood use.
• The bafe lters and grease trays should be
cleaned once a month, or as needed. See
page 18 for cleaning instructions.
STEP 18
Install Grease Trays
• Place the grease trays into the the track at the
back of the range hood.
• Slide them left and right until all trays are placed
side-by-side in the track.
• The bafe lters and grease trays should be
cleaned once a month, or as needed. See
page 18 for cleaning instructions.