To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
The power code is disconnected.
The power switch is off.
The power code is disonnected
Plug out.
Switch on.
Replace the fuse by new one
(proper size)
2. The power is on, but FND
viewer doesn't work
Check the FND connector.
Plug in the FND connector.
The slot doesn't work.
Check the power switch.
3. The slot is doesn't work
Check the power switch.
Something is wrong with slot.
Switch on.
Repair the slot.
Something is wrong with speaker.
Check the speaker connector
Repair the speaker.
Connect propenly.
5. Unable to pull the
punchball
Check the power.
Make mistakes in connecting
solenoid.
The couse of solenoid trouble
Switch on.
Connect the solenoid properly.
Repiace the solenoid.
6. Punchball is pulled of
itsell During the game.
Not gather in upon shape & I
shape parts because the tension
of spring is warn away.
Make the tension of spring strong
or exchange it.
7. Not counted a score in
spite of hilting the punchball
Microswitch trouble, or
disconncetion
Replace the miaro switch with
new one.
8. Replace the punchball by
another one
Open the cover, release M10bolt,
exchange them in reverse order.
To Next Page
