Anderson NutriWrap 780 SB User Manual

18 Double Stretcher – Operator’s Manual Anderson Group
Figure 4 – Drop off lever (unloading platform)
3. Loosen both adjustment bolts as illustrated in Figure 5, then place the folding arm so
that it is at the same height or just a little lower than the plastic cut and hold so that
the plastic rests on it when it is installed. Tighten the bolts:
Figure 5 – Bolts for adjusting the folding arm

Anderson NutriWrap 780 SB Specifications

General

Brand	Anderson
Model	NutriWrap 780 SB
Category	Stretch Wrapping Systems
Language	English