Anderson Group Double Stretcher – Operator’s Manual 31
9 Transport and Storage
This chapter describes the procedures and the rules to follow for transporting and storage of
the double stretcher of the 780SB wrapper.
Warning!
Be sure that you respect the procedures and the
rules of the transport and storage of your wrapper
as described in the manual of the 780SB wrapper.
Locking the double stretcher in transport and storing position
Before moving the wrapper, or when storing the machine, lock the double stretcher pole in
transport position as per the following procedure:
1. By using the unloading lever, raise the folding arm completely of the double
stretcher.
2. Close the valve located on the pole of the double stretcher.
3. Remove the pin that holds the double stretcher pole in wrapping position.
4. Fold back the arm and place it in transport/storage position (parallel to the frame of
the wrapper).
5. Insert the pin to secure the double stretcher pole into its transport position.
To Next Page
Loading...
Need help?
General