Andersson CAM 1.5 - Operation; Video Recording and Playback; Photographing and Zooming; Record Mode Configuration

English Svenska Norsk
9
Video recording
Press the Video button to start recording. When a
video is being recorded, a time indicator will be dis-
play on the LCD monitor. To stop recording, press the
Video button again.
Press the Playback button or touch on the screen to
view the recorded video. Four resolution settings are
available: Full HD, HD+, HD and VGA.
Taking photographs
Press the Photo button halfway down until the focus-
ing frame turns from white to green. Then, press it fully
down to take photo.
Press the Playback button or touch on the screen to
view the photos. Three resolution settings are avail-
able: 16, 5 and 3 Mega Pixels.
Using the zoom
1. To zoom in/out, press the Tele/Wide Button.
2. It can be set from 1X~50X (10X Optical zoom and
5X Digital zoom).
RECORD MODE
1. Touch
to see the menu on the screen.
2. Sweep your finger do see the options:
,otohP ,oediV
and
Setting.
VIDEO
1. Touch
on the screen in record mode. The menu
will show on the screen.
2. Sweep your finger do see the options:
Resolution,
Light, Scene, White Balance, Pre-record, Motion De-
tect, Slow Motion,
and
Time Lapse.
Resolution
1. In the Video menu, touch on the screen.
2. Touch to select the desired option.
3. Touch the OK icon and to exit.
Light
Light ON: The light will be turned on.
Digital Light: To extend the dynamic range for back-
light and high contrast so that the objects will be
brighter and clearer.
Light OFF: The light is turned off.
Press the light button to turn on/off the digital light.
Or press to turn on/off the digital light.
Chapter 4: Operation